مشکل اپدیت و نصب و همچنین درایور انویدیا

[Sajjad_Rahbari]

ابتدا اجازه بدید که یه کپی از کل ترمینال رو قرار بدم :
اول که با دستور sudo pacman -Syyu رفتم برای اپدیت
همه چیز درست بود و دو تا درخواست ازم کرد

:: Replace kdsoap-qt6 with extra/kdsoap? [Y/n] y
:: Replace vulkan-mesa-device-select with extra/vulkan-mesa-implicit-layers? [Y/n] y

بعد اون هم یه همچین چیزی اومد که گذاشتم همون پیشفرض باشه

:: Repository extra
   1) tesseract-data-afr  2) tesseract-data-amh  3) tesseract-data-ara  4) tesseract-data-asm  5) tesseract-data-aze  6) tesseract-data-aze_cyrl  7) tesseract-data-bel  8) tesseract-data-ben
   9) tesseract-data-bod  10) tesseract-data-bos  11) tesseract-data-bre  12) tesseract-data-bul  13) tesseract-data-cat  14) tesseract-data-ceb  15) tesseract-data-ces  16) tesseract-data-chi_sim
   17) tesseract-data-chi_sim_vert  18) tesseract-data-chi_tra  19) tesseract-data-chi_tra_vert  20) tesseract-data-chr  21) tesseract-data-cos  22) tesseract-data-cym  23) tesseract-data-dan
   24) tesseract-data-dan_frak  25) tesseract-data-deu  26) tesseract-data-deu_frak  27) tesseract-data-div  28) tesseract-data-dzo  29) tesseract-data-ell  30) tesseract-data-eng
   31) tesseract-data-enm  32) tesseract-data-epo  33) tesseract-data-equ  34) tesseract-data-est  35) tesseract-data-eus  36) tesseract-data-fao  37) tesseract-data-fas  38) tesseract-data-fil
   39) tesseract-data-fin  40) tesseract-data-fra  41) tesseract-data-frk  42) tesseract-data-frm  43) tesseract-data-fry  44) tesseract-data-gla  45) tesseract-data-gle  46) tesseract-data-glg
   47) tesseract-data-grc  48) tesseract-data-guj  49) tesseract-data-hat  50) tesseract-data-heb  51) tesseract-data-hin  52) tesseract-data-hrv  53) tesseract-data-hun  54) tesseract-data-hye
   55) tesseract-data-iku  56) tesseract-data-ind  57) tesseract-data-isl  58) tesseract-data-ita  59) tesseract-data-ita_old  60) tesseract-data-jav  61) tesseract-data-jpn
   62) tesseract-data-jpn_vert  63) tesseract-data-kan  64) tesseract-data-kat  65) tesseract-data-kat_old  66) tesseract-data-kaz  67) tesseract-data-khm  68) tesseract-data-kir
   69) tesseract-data-kmr  70) tesseract-data-kor  71) tesseract-data-kor_vert  72) tesseract-data-lao  73) tesseract-data-lat  74) tesseract-data-lav  75) tesseract-data-lit
   76) tesseract-data-ltz  77) tesseract-data-mal  78) tesseract-data-mar  79) tesseract-data-mkd  80) tesseract-data-mlt  81) tesseract-data-mon  82) tesseract-data-mri  83) tesseract-data-msa
   84) tesseract-data-mya  85) tesseract-data-nep  86) tesseract-data-nld  87) tesseract-data-nor  88) tesseract-data-oci  89) tesseract-data-ori  90) tesseract-data-pan  91) tesseract-data-pol
   92) tesseract-data-por  93) tesseract-data-pus  94) tesseract-data-que  95) tesseract-data-ron  96) tesseract-data-rus  97) tesseract-data-san  98) tesseract-data-sin  99) tesseract-data-slk
   100) tesseract-data-slk_frak  101) tesseract-data-slv  102) tesseract-data-snd  103) tesseract-data-spa  104) tesseract-data-spa_old  105) tesseract-data-sqi  106) tesseract-data-srp
   107) tesseract-data-srp_latn  108) tesseract-data-sun  109) tesseract-data-swa  110) tesseract-data-swe  111) tesseract-data-syr  112) tesseract-data-tam  113) tesseract-data-tat
   114) tesseract-data-tel  115) tesseract-data-tgk  116) tesseract-data-tgl  117) tesseract-data-tha  118) tesseract-data-tir  119) tesseract-data-ton  120) tesseract-data-tur
   121) tesseract-data-uig  122) tesseract-data-ukr  123) tesseract-data-urd  124) tesseract-data-uzb  125) tesseract-data-uzb_cyrl  126) tesseract-data-vie  127) tesseract-data-yid
   128) tesseract-data-yor

Enter a number (default=1): 
looking for conflicting packages...
warning: dependency cycle detected:
warning: librsvg will be installed before its gdk-pixbuf2 dependency
warning: dependency cycle detected:
warning: qt6-multimedia-ffmpeg will be installed before its qt6-multimedia dependency
warning: dependency cycle detected:
warning: xdg-desktop-portal-kde will be installed before its plasma-workspace dependency
warning: dependency cycle detected:
warning: phonon-qt6-vlc will be installed before its phonon-qt6 dependency
warning: dependency cycle detected:
warning: vlc-plugin-matroska will be installed before its vlc-plugins-base dependency
warning: dependency cycle detected:
warning: tesseract-data-afr will be installed before its tesseract dependency

و درنهایت هم رفت برای دانلود و نصب 820 تا پکیج که همرو دانلود کرد و وقتی تموم شد اول چندتا ارور http داد و بعدش هم هی سوال میپرسید که این پکیج امضا نداره و .. میخوای پاک کنی یا نه که در نهایت من میگفتم اره و اخرشم یه خطایی داد
البته من تو انجمن سرچ کردم و یکی همچین خطایی برای یک نفر دیگه پیش اومده بود و گفته بودید که زمان و تاریخ مشکل داره که من چک کردم همه چیز درست است.

بعدش گفتم خب ولش برم درایور انویدیا بریزم و همون کار هایی که در راهنمای سایت پارچ اومده بود انجام دادم که همون طور که در ترمینال (زیر) مشاهده میکنید اصلا میگه انویدیا رو نمیشناسه

 Total (820/820)                         2.2 GiB  1242 KiB/s 30:17 [------------------------------------] 100%
error: failed retrieving file 'qt6-webengine-6.11.1-4-x86_64.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8)
error: failed retrieving file 'linux-firmware-intel-20260622-1-any.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8)
error: failed retrieving file 'linux-firmware-nvidia-20260622-1-any.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8)
warning: too many errors from mirror.aarnet.edu.au, skipping for the remainder of this transaction
error: failed retrieving file 'plasma-workspace-wallpapers-6.7.1-1-any.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8)
error: failed retrieving file 'linux-7.0.14.arch1-1-x86_64.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8)
(820/820) checking keys in keyring                                 [------------------------------------] 100%
(820/820) checking package integrity                               [------------------------------------] 100%
error: ncurses: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/ncurses-6.6-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libffi: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libffi-3.6.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: zlib: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/zlib-1:1.3.2-3-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: expat: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/expat-2.8.2-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: gdbm: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/gdbm-1.26-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libevent: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libevent-2.1.12-5-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libcap-ng: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libcap-ng-0.9.3-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: audit: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/audit-4.1.4-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libnsl: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libnsl-2.0.1-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libssh2: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libssh2-1.11.1-5-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: shadow: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/shadow-4.19.4.arch1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: alsa-ucm-conf: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/alsa-ucm-conf-1.2.16.1-1-any.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: alsa-lib: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/alsa-lib-1.2.16.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: alsa-utils: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/alsa-utils-1.2.16-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libusb: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libusb-1.0.30-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libjpeg-turbo: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libjpeg-turbo-3.1.4.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libaio: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libaio-0.3.113-4-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: gnupg: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/gnupg-2.4.9-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libopenmpt: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libopenmpt-0.8.7-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: udisks2: signature from "George Hu <integral@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/udisks2-2.11.1-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: libpcap: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/libpcap-1.10.6-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: jemalloc: signature from "George Hu <integral@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/jemalloc-1:5.3.1-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: efivar: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/efivar-39-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: efibootmgr: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/efibootmgr-18-4-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: faac: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/faac-1.50-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: fluidsynth: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/fluidsynth-2.5.5-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: freerdp: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/freerdp-2:3.27.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: serd: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/serd-0.32.10-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: zix: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/zix-0.8.2-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: lilv: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/lilv-0.28.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: openssh: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/openssh-10.3p1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: minizip: signature from "David Runge <dvzrv@archlinux.org>" is unknown trust
:: File /var/cache/pacman/pkg/minizip-1:1.3.2-3-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
[sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia-helper && sudo nvidia-helper
[sudo] password for sajjadr: 
resolving dependencies...
looking for conflicting packages...

Package (1)          New Version  Net Change  Download Size

world/nvidia-helper  1.1-1          0.04 MiB       0.03 MiB

Total Download Size:   0.03 MiB
Total Installed Size:  0.04 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 nvidia-helper-1.1-1-x86_64             26.2 KiB  21.9 KiB/s 00:01 [------------------------------------] 100%
(1/1) checking keys in keyring                                     [------------------------------------] 100%
(1/1) checking package integrity                                   [------------------------------------] 100%
(1/1) loading package files                                        [------------------------------------] 100%
(1/1) checking for file conflicts                                  [------------------------------------] 100%
(1/1) checking available disk space                                [------------------------------------] 100%
:: Processing package changes...
(1/1) installing nvidia-helper                                     [------------------------------------] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP108 [GeForce GT 1030] [10de:1d01] (rev a1)

Checking card:  NVIDIA Corporation GP108 [GeForce GT 1030] (rev a1)
Your card is supported by all driver versions.

IMPORTANT: As of driver 590, Arch has switched to Open Kernel Modules.
Your card is also supported by the Tesla 535 drivers series.

It is recommended to install the
 nvidia-open
package.
[sajjadr@sajjad-rahbari ~]$ sudo nano /etc/mkinitcpio.conf
[sajjadr@sajjad-rahbari ~]$ uname -r
6.17.9-arch1-1
[sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia nvidia-utils nvidia-settings
[sudo] password for sajjadr: 
error: target not found: nvidia
[sajjadr@sajjad-rahbari ~]$ sudo nano /etc/mkinitcpio.conf
[sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia nvidia-utils nvidia-settings
error: target not found: nvidia
[sajjadr@sajjad-rahbari ~]$ 

درنهایت من موندم چیکار کنم الان این اولین باره که دارم پارچ رو نصب میکنم و اصلا موندم چرا سیستم خام تو اپدیت باید خطا بده ، اگه بخوام درمورد نحوه نصب هم توضیح بدم داخل درایو d 190 گیگ حدودا خالی کردم و 70 او خورده ای دادم به روت 1 گیگ دادم به efi و بقیشو دادم به home
هنگام نصب زمان و … رو گذاشتم رو همین امریکا و پیشفرض باشه وقتی نصب شد فقط رفتم تو بخش تاریخ و گذاشتم رو تهران و بعدش هم کیبورد رو اصلاح کردم هم فارسی گذاشتم هم انگلیسی و دیگه کار دیگه ای نکردم.
درموردم مشخصات سیستم هم بخوام بگم
16 گیگ رم
intel core i5 12400
nvidia gforce 1030

به نظرم هرچی لازم بود گفتم امیدوارم بتونین راهنمایی کنین تا درست شه و بتونم من هم از پارچ استفاده کنم

[MPRXD]

sudo pacman -Syy archlinux-keyring

سپس:

sudo pacman -Syu

اینطوری باید اوکی بشه مشکلت برای آپدیت

[Sajjad_Rahbari]

دستور اولی که فرمودید رو وارد کردم ولی این خطارو میده

[sajjadr@sajjad-rahbari ~]$ sudo pacman -Syy archlinux-keyring
[sudo] password for sajjadr: 
:: Synchronizing package databases...
 core                                               126.5 KiB  50.1 KiB/s 00:03 [----------------------------------------------] 100%
 extra                                                8.3 MiB   812 KiB/s 00:10 [----------------------------------------------] 100%
 multilib                                           127.5 KiB  49.5 KiB/s 00:03 [----------------------------------------------] 100%
 world                                               25.7 KiB  30.0 KiB/s 00:01 [----------------------------------------------] 100%
resolving dependencies...
looking for conflicting packages...

Package (1)             Old Version  New Version  Net Change

core/archlinux-keyring  20251116-1   20260612-1     0.03 MiB

Total Installed Size:  1.72 MiB
Net Upgrade Size:      0.03 MiB

:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring                                                  [----------------------------------------------] 100%
(1/1) checking package integrity                                                [----------------------------------------------] 100%
(1/1) loading package files                                                     [----------------------------------------------] 100%
(1/1) checking for file conflicts                                               [----------------------------------------------] 100%
(1/1) checking available disk space                                             [----------------------------------------------] 100%
:: Processing package changes...
(1/1) upgrading archlinux-keyring                                               [----------------------------------------------] 100%
gpg: key CDB7978664F502EC was created 12309 seconds in the future (time warp or clock problem)
==> Appending keys from archlinux.gpg...
gpg: key CDB7978664F502EC was created 12308 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem)
==> Locally signing trusted keys in keyring...
==> ERROR: 99B6618472A3B3B814185BAED7D3D823B88BDB9B could not be locally signed.
error: command failed to execute correctly
:: Running post-transaction hooks...
(1/3) Reloading system manager configuration...
(2/3) Restarting marked services...
(3/3) Arming ConditionNeedsUpdate...

به نظر میاد خطای زمان و تاریخه ولی خب زمان من که درسته
با سایت time.ir که حداقل برابر برابره

[sbehdani]

داره سر زمان غر میزنه همچنان؛ ساعتتون یا تایم‌زونتون برابر نیست با چیزی که باید باشه.

sudo timedatectl set-ntp true

sudo timedatectl set-timezone Asia/Tehran

این رو امتحان کنید و اگر هم نشد با استفاده از این ویدئو کارساز ntp رو تغییر بدید.

آپارات - سرویس اشتراک ویدیو

بعدش دوباره امتحان کنید:

sudo pacman -S archlinux-keyring

sudo pacman -Syu --noconfirm

[Sajjad_Rahbari]

مشکل اپدیت نشدن تقریبا حل شد با اینکه من از طریق تنظیمات قبلا تایم و زون رو تغییر داده بودم ولی مثل اینکه باید از طریق ترمینال هم اینکار رو انجام میدادم. فقط بعد اپدیت با اینکه اپدیت به نظر به درستی پایان یافت ولی خطایی وجود داشت

:: Running post-transaction hooks...
( 1/33) Creating system user accounts...
( 2/33) Creating temporary files...
( 3/33) Updating journal message catalog...
( 4/33) Updating udev hardware database...
( 5/33) Applying kernel sysctl settings...
( 6/33) Reloading system manager configuration...
( 7/33) Reloading user manager configuration...
( 8/33) Updating the MIME type database...
( 9/33) Enqueuing marked services...
(10/33) Reloading device manager configuration...
(11/33) Arming ConditionNeedsUpdate...
(12/33) Updating fontconfig configuration...
(13/33) Rebuilding certificate stores...
(14/33) Updating module dependencies...
(15/33) Install DKMS modules
==> dkms install --no-depmod broadcom-wl/6.30.223.271 -k 7.0.14-arch1-1
==> depmod 7.0.14-arch1-1
(16/33) Restart a running sshd.service
(17/33) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'archiso'
==> Using configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: '7.0.14-arch1-1'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [microcode]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [keyboard]
  -> Running build hook: [keymap]
  -> Running build hook: [consolefont]
  -> Running build hook: [plymouth]
  -> Running build hook: [filesystems]
  -> Running build hook: [fsck]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
error: command failed to execute correctly
(18/33) Updating the appstream cache...
✔ Metadata cache was updated successfully.
(19/33) Restarting accounts-daemon...
(20/33) Reloading system bus configuration...
(21/33) Checking for old perl modules...
(22/33) Updating fontconfig cache...
(23/33) Updating GIO module cache...
(24/33) Compiling GSettings XML schema files...
(25/33) Probing GTK3 input method modules...
(26/33) Updating icon theme caches...
(27/33) Reloading GVFS config...
(28/33) Updating the info directory file...
(29/33) Updating the desktop file MIME type cache...
(30/33) Updating the vlc plugin cache...
(31/33) Updating X fontdir indices...
(32/33) Reinstall GRUB
UEFI system detected. Reinstalling GRUB for UEFI...
Installing for x86_64-efi platform.
Installation finished. No error reported.
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/amd-ucode.img /boot/initramfs-linux.img
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
Found Windows Boot Manager on /dev/nvme0n1p1@/efi/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for UEFI Firmware Settings ...
done
(33/33) Generate GRUB configuration
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/amd-ucode.img /boot/initramfs-linux.img
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
Found Windows Boot Manager on /dev/nvme0n1p1@/efi/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for UEFI Firmware Settings ...
done

همان طور که معلومه این ارور برای nvidia هست من فکر کردم این به دلیل ان است که من قبلا تلاش در نصب درایور انویدیا داشتم ولی خب خطا میداد

همینطور مرورگر پیشفرض هم بعد از ری استارت دیگر باز نشد و من مجبور به نصب فایر فاکس شدم…

بخش اول مشکل من حل شد ولی بخش دوم همچنان باقیست من طبق راهنمای موجود در سایت رسمی arch اقدام به نصب درایور اختصاصی کارت گرافیک خودم کردم ولی اکنون بعد از نصب به نظر میرسه کارت گرافیک نصب نشده چون صفحه بزرگتر شده و نمیتوان رزولویشن را تغییر داد و همه چیز بی کیفیت شده ،
من قسمت ترمینال نصب را در اختیار شما قرار میدهم :

[sajjadr@sajjad-rahbari ~]$ sudo nvidia-helper
[sudo] password for sajjadr: 
Sorry, try again.
[sudo] password for sajjadr: 
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP108 [GeForce GT 1030] [10de:1d01] (rev a1)

Checking card:  NVIDIA Corporation GP108 [GeForce GT 1030] (rev a1)
Your card is supported by all driver versions.

IMPORTANT: As of driver 590, Arch has switched to Open Kernel Modules.
Your card is also supported by the Tesla 535 drivers series.

It is recommended to install the
 nvidia-open
package.
[sajjadr@sajjad-rahbari ~]$ sudo nano /etc/mkinitcpio.conf
[sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia-open nvidia-utils nvidia-settings
warning: nvidia-open-610.43.02-7 is up to date -- reinstalling
warning: nvidia-utils-610.43.02-3 is up to date -- reinstalling
warning: nvidia-settings-610.43.02-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Package (3)            Old Version  New Version  Net Change

extra/nvidia-open      610.43.02-7  610.43.02-7    0.00 MiB
extra/nvidia-settings  610.43.02-1  610.43.02-1    0.00 MiB
extra/nvidia-utils     610.43.02-3  610.43.02-3    0.00 MiB

Total Installed Size:  894.64 MiB
Net Upgrade Size:        0.00 MiB

:: Proceed with installation? [Y/n] y
(3/3) checking keys in keyring                                     [------------------------------------] 100%
(3/3) checking package integrity                                   [------------------------------------] 100%
(3/3) loading package files                                        [------------------------------------] 100%
(3/3) checking for file conflicts                                  [------------------------------------] 100%
(3/3) checking available disk space                                [------------------------------------] 100%
:: Processing package changes...
(1/3) reinstalling nvidia-utils                                    [------------------------------------] 100%
(2/3) reinstalling nvidia-open                                     [------------------------------------] 100%
(3/3) reinstalling nvidia-settings                                 [------------------------------------] 100%
:: Running post-transaction hooks...
(1/9) Creating system user accounts...
(2/9) Reloading system manager configuration...
(3/9) Enqueuing marked services...
(4/9) Reloading device manager configuration...
(5/9) Arming ConditionNeedsUpdate...
(6/9) Updating module dependencies...
(7/9) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'archiso'
==> Using configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: '7.0.14-arch1-1'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [microcode]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [keyboard]
  -> Running build hook: [keymap]
  -> Running build hook: [consolefont]
  -> Running build hook: [plymouth]
  -> Running build hook: [filesystems]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
  -> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
(8/9) Reloading system bus configuration...
(9/9) Updating the desktop file MIME type cache...
[sajjadr@sajjad-rahbari ~]$ 

به نظرم همه چیز بدون خطا اجرا شده ولی نمیدانم چرا پس کار نمیکنه

[sbehdani]

درایور گرافیک رو از مستندات پارچ نصب کنید.

برای گرافیک شما توصیه میشه درایور ۵۸۰ رو نصب کنید برای این کار اول از همه مخزن chaotic رو فعال کنید:

sudo pacman -S chaotic-aur
sudo chaotic-install

و بعدش درایور رو نصب کنید:

sudo pacman -S nvidia-580xx-dkms

[Sajjad_Rahbari]

واقعا متشکرم از شما پشتیبانی واقعا عالی و سریع و کامل بود
فقط خدمت کسانی که در اینده احتمالا میبینن این تاپیک رو برای کارت گرافیک بعد از نصب و فعال کردن chaotic

اگر براشون دستور

sudo pacman -S nvidia-580xx-dkms

خطای

error: target not found: nvidia-580xx-dkms

داد از دستور زیر استفاده کنند:

sudo pacman -Sy nvidia-580xx-dkms

همچنین ممکنه براتون یه جاهایی گیر کنه و باید یه چند دقیقه یا چندین دقیقه صبر کنید تا بیاد براتون بعدش هم یه ارور تایم اوت میده که مهم نیست. بزارین کارشو ادامه بده.