# مشکل اپدیت و نصب و همچنین درایور انویدیا **URL:** \ **Category:** گزارش مشکل\ **Tags:** nvidia, plasma, fa\_IR, آپدیت, پارچ\ **Created:** [June 29, 2026, 10:36am UTC](https://forum.parchlinux.com/t/topic/1098 "2026-06-29T10:36:13Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Sajjad\_Rahbari](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/sajjad_rahbari/32/898_2.png) [@Sajjad\_Rahbari](https://forum.parchlinux.com/u/Sajjad_Rahbari)\ **Post date:** [June 29, 2026, 10:36am UTC](https://forum.parchlinux.com/t/topic/1098/1 "2026-06-29T10:36:14Z")
ابتدا اجازه بدید که یه کپی از کل ترمینال رو قرار بدم : اول که با دستور sudo pacman -Syyu رفتم برای اپدیت همه چیز درست بود و دو تا درخواست ازم کرد ```auto :: Replace kdsoap-qt6 with extra/kdsoap? [Y/n] y :: Replace vulkan-mesa-device-select with extra/vulkan-mesa-implicit-layers? [Y/n] y ``` بعد اون هم یه همچین چیزی اومد که گذاشتم همون پیشفرض باشه ```auto :: Repository extra 1) tesseract-data-afr 2) tesseract-data-amh 3) tesseract-data-ara 4) tesseract-data-asm 5) tesseract-data-aze 6) tesseract-data-aze_cyrl 7) tesseract-data-bel 8) tesseract-data-ben 9) tesseract-data-bod 10) tesseract-data-bos 11) tesseract-data-bre 12) tesseract-data-bul 13) tesseract-data-cat 14) tesseract-data-ceb 15) tesseract-data-ces 16) tesseract-data-chi_sim 17) tesseract-data-chi_sim_vert 18) tesseract-data-chi_tra 19) tesseract-data-chi_tra_vert 20) tesseract-data-chr 21) tesseract-data-cos 22) tesseract-data-cym 23) tesseract-data-dan 24) tesseract-data-dan_frak 25) tesseract-data-deu 26) tesseract-data-deu_frak 27) tesseract-data-div 28) tesseract-data-dzo 29) tesseract-data-ell 30) tesseract-data-eng 31) tesseract-data-enm 32) tesseract-data-epo 33) tesseract-data-equ 34) tesseract-data-est 35) tesseract-data-eus 36) tesseract-data-fao 37) tesseract-data-fas 38) tesseract-data-fil 39) tesseract-data-fin 40) tesseract-data-fra 41) tesseract-data-frk 42) tesseract-data-frm 43) tesseract-data-fry 44) tesseract-data-gla 45) tesseract-data-gle 46) tesseract-data-glg 47) tesseract-data-grc 48) tesseract-data-guj 49) tesseract-data-hat 50) tesseract-data-heb 51) tesseract-data-hin 52) tesseract-data-hrv 53) tesseract-data-hun 54) tesseract-data-hye 55) tesseract-data-iku 56) tesseract-data-ind 57) tesseract-data-isl 58) tesseract-data-ita 59) tesseract-data-ita_old 60) tesseract-data-jav 61) tesseract-data-jpn 62) tesseract-data-jpn_vert 63) tesseract-data-kan 64) tesseract-data-kat 65) tesseract-data-kat_old 66) tesseract-data-kaz 67) tesseract-data-khm 68) tesseract-data-kir 69) tesseract-data-kmr 70) tesseract-data-kor 71) tesseract-data-kor_vert 72) tesseract-data-lao 73) tesseract-data-lat 74) tesseract-data-lav 75) tesseract-data-lit 76) tesseract-data-ltz 77) tesseract-data-mal 78) tesseract-data-mar 79) tesseract-data-mkd 80) tesseract-data-mlt 81) tesseract-data-mon 82) tesseract-data-mri 83) tesseract-data-msa 84) tesseract-data-mya 85) tesseract-data-nep 86) tesseract-data-nld 87) tesseract-data-nor 88) tesseract-data-oci 89) tesseract-data-ori 90) tesseract-data-pan 91) tesseract-data-pol 92) tesseract-data-por 93) tesseract-data-pus 94) tesseract-data-que 95) tesseract-data-ron 96) tesseract-data-rus 97) tesseract-data-san 98) tesseract-data-sin 99) tesseract-data-slk 100) tesseract-data-slk_frak 101) tesseract-data-slv 102) tesseract-data-snd 103) tesseract-data-spa 104) tesseract-data-spa_old 105) tesseract-data-sqi 106) tesseract-data-srp 107) tesseract-data-srp_latn 108) tesseract-data-sun 109) tesseract-data-swa 110) tesseract-data-swe 111) tesseract-data-syr 112) tesseract-data-tam 113) tesseract-data-tat 114) tesseract-data-tel 115) tesseract-data-tgk 116) tesseract-data-tgl 117) tesseract-data-tha 118) tesseract-data-tir 119) tesseract-data-ton 120) tesseract-data-tur 121) tesseract-data-uig 122) tesseract-data-ukr 123) tesseract-data-urd 124) tesseract-data-uzb 125) tesseract-data-uzb_cyrl 126) tesseract-data-vie 127) tesseract-data-yid 128) tesseract-data-yor Enter a number (default=1): looking for conflicting packages... warning: dependency cycle detected: warning: librsvg will be installed before its gdk-pixbuf2 dependency warning: dependency cycle detected: warning: qt6-multimedia-ffmpeg will be installed before its qt6-multimedia dependency warning: dependency cycle detected: warning: xdg-desktop-portal-kde will be installed before its plasma-workspace dependency warning: dependency cycle detected: warning: phonon-qt6-vlc will be installed before its phonon-qt6 dependency warning: dependency cycle detected: warning: vlc-plugin-matroska will be installed before its vlc-plugins-base dependency warning: dependency cycle detected: warning: tesseract-data-afr will be installed before its tesseract dependency ``` و درنهایت هم رفت برای دانلود و نصب 820 تا پکیج که همرو دانلود کرد و وقتی تموم شد اول چندتا ارور http داد و بعدش هم هی سوال میپرسید که این پکیج امضا نداره و .. میخوای پاک کنی یا نه که در نهایت من میگفتم اره و اخرشم یه خطایی داد البته من تو انجمن سرچ کردم و یکی همچین خطایی برای یک نفر دیگه پیش اومده بود و گفته بودید که زمان و تاریخ مشکل داره که من چک کردم همه چیز درست است. بعدش گفتم خب ولش برم درایور انویدیا بریزم و همون کار هایی که در راهنمای سایت پارچ اومده بود انجام دادم که همون طور که در ترمینال (زیر) مشاهده میکنید اصلا میگه انویدیا رو نمیشناسه 😕 ```auto Total (820/820) 2.2 GiB 1242 KiB/s 30:17 [------------------------------------] 100% error: failed retrieving file 'qt6-webengine-6.11.1-4-x86_64.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8) error: failed retrieving file 'linux-firmware-intel-20260622-1-any.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8) error: failed retrieving file 'linux-firmware-nvidia-20260622-1-any.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8) warning: too many errors from mirror.aarnet.edu.au, skipping for the remainder of this transaction error: failed retrieving file 'plasma-workspace-wallpapers-6.7.1-1-any.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8) error: failed retrieving file 'linux-7.0.14.arch1-1-x86_64.pkg.tar.zst' from mirror.aarnet.edu.au : HTTP/2 stream 1 was not closed cleanly: CANCEL (err 8) (820/820) checking keys in keyring [------------------------------------] 100% (820/820) checking package integrity [------------------------------------] 100% error: ncurses: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/ncurses-6.6-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libffi: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libffi-3.6.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: zlib: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/zlib-1:1.3.2-3-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: expat: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/expat-2.8.2-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: gdbm: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/gdbm-1.26-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libevent: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libevent-2.1.12-5-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libcap-ng: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libcap-ng-0.9.3-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: audit: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/audit-4.1.4-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libnsl: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libnsl-2.0.1-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libssh2: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libssh2-1.11.1-5-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: shadow: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/shadow-4.19.4.arch1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: alsa-ucm-conf: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/alsa-ucm-conf-1.2.16.1-1-any.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: alsa-lib: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/alsa-lib-1.2.16.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: alsa-utils: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/alsa-utils-1.2.16-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libusb: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libusb-1.0.30-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libjpeg-turbo: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libjpeg-turbo-3.1.4.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libaio: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libaio-0.3.113-4-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: gnupg: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/gnupg-2.4.9-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libopenmpt: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libopenmpt-0.8.7-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: udisks2: signature from "George Hu " is unknown trust :: File /var/cache/pacman/pkg/udisks2-2.11.1-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: libpcap: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/libpcap-1.10.6-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: jemalloc: signature from "George Hu " is unknown trust :: File /var/cache/pacman/pkg/jemalloc-1:5.3.1-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: efivar: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/efivar-39-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: efibootmgr: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/efibootmgr-18-4-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: faac: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/faac-1.50-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: fluidsynth: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/fluidsynth-2.5.5-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: freerdp: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/freerdp-2:3.27.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: serd: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/serd-0.32.10-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: zix: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/zix-0.8.2-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: lilv: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/lilv-0.28.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: openssh: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/openssh-10.3p1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: minizip: signature from "David Runge " is unknown trust :: File /var/cache/pacman/pkg/minizip-1:1.3.2-3-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). Do you want to delete it? [Y/n] y error: failed to commit transaction (invalid or corrupted package) Errors occurred, no packages were upgraded. [sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia-helper && sudo nvidia-helper [sudo] password for sajjadr: resolving dependencies... looking for conflicting packages... Package (1) New Version Net Change Download Size world/nvidia-helper 1.1-1 0.04 MiB 0.03 MiB Total Download Size: 0.03 MiB Total Installed Size: 0.04 MiB :: Proceed with installation? [Y/n] y :: Retrieving packages... nvidia-helper-1.1-1-x86_64 26.2 KiB 21.9 KiB/s 00:01 [------------------------------------] 100% (1/1) checking keys in keyring [------------------------------------] 100% (1/1) checking package integrity [------------------------------------] 100% (1/1) loading package files [------------------------------------] 100% (1/1) checking for file conflicts [------------------------------------] 100% (1/1) checking available disk space [------------------------------------] 100% :: Processing package changes... (1/1) installing nvidia-helper [------------------------------------] 100% :: Running post-transaction hooks... (1/1) Arming ConditionNeedsUpdate... Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP108 [GeForce GT 1030] [10de:1d01] (rev a1) Checking card: NVIDIA Corporation GP108 [GeForce GT 1030] (rev a1) Your card is supported by all driver versions. IMPORTANT: As of driver 590, Arch has switched to Open Kernel Modules. Your card is also supported by the Tesla 535 drivers series. It is recommended to install the nvidia-open package. [sajjadr@sajjad-rahbari ~]$ sudo nano /etc/mkinitcpio.conf [sajjadr@sajjad-rahbari ~]$ uname -r 6.17.9-arch1-1 [sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia nvidia-utils nvidia-settings [sudo] password for sajjadr: error: target not found: nvidia [sajjadr@sajjad-rahbari ~]$ sudo nano /etc/mkinitcpio.conf [sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia nvidia-utils nvidia-settings error: target not found: nvidia [sajjadr@sajjad-rahbari ~]$ ``` درنهایت من موندم چیکار کنم الان این اولین باره که دارم پارچ رو نصب میکنم و اصلا موندم چرا سیستم خام تو اپدیت باید خطا بده ، اگه بخوام درمورد نحوه نصب هم توضیح بدم داخل درایو d 190 گیگ حدودا خالی کردم و 70 او خورده ای دادم به روت 1 گیگ دادم به efi و بقیشو دادم به home هنگام نصب زمان و … رو گذاشتم رو همین امریکا و پیشفرض باشه وقتی نصب شد فقط رفتم تو بخش تاریخ و گذاشتم رو تهران و بعدش هم کیبورد رو اصلاح کردم هم فارسی گذاشتم هم انگلیسی و دیگه کار دیگه ای نکردم. درموردم مشخصات سیستم هم بخوام بگم 16 گیگ رم intel core i5 12400 nvidia gforce 1030 به نظرم هرچی لازم بود گفتم امیدوارم بتونین راهنمایی کنین تا درست شه و بتونم من هم از پارچ استفاده کنم 🙂 ---
**Author:** ![MPRXD](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/mprxd/32/807_2.png) [@MPRXD](https://forum.parchlinux.com/u/MPRXD)\ **Post date:** [June 29, 2026, 1:41pm UTC](https://forum.parchlinux.com/t/topic/1098/2 "2026-06-29T13:41:25Z")
```auto sudo pacman -Syy archlinux-keyring ``` سپس: ```auto sudo pacman -Syu ``` اینطوری باید اوکی بشه مشکلت برای آپدیت ---
**Author:** ![Sajjad\_Rahbari](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/sajjad_rahbari/32/898_2.png) [@Sajjad\_Rahbari](https://forum.parchlinux.com/u/Sajjad_Rahbari)\ **Post date:** [June 29, 2026, 6:15pm UTC](https://forum.parchlinux.com/t/topic/1098/3 "2026-06-29T18:15:33Z")
دستور اولی که فرمودید رو وارد کردم ولی این خطارو میده ```auto [sajjadr@sajjad-rahbari ~]$ sudo pacman -Syy archlinux-keyring [sudo] password for sajjadr: :: Synchronizing package databases... core 126.5 KiB 50.1 KiB/s 00:03 [----------------------------------------------] 100% extra 8.3 MiB 812 KiB/s 00:10 [----------------------------------------------] 100% multilib 127.5 KiB 49.5 KiB/s 00:03 [----------------------------------------------] 100% world 25.7 KiB 30.0 KiB/s 00:01 [----------------------------------------------] 100% resolving dependencies... looking for conflicting packages... Package (1) Old Version New Version Net Change core/archlinux-keyring 20251116-1 20260612-1 0.03 MiB Total Installed Size: 1.72 MiB Net Upgrade Size: 0.03 MiB :: Proceed with installation? [Y/n] y (1/1) checking keys in keyring [----------------------------------------------] 100% (1/1) checking package integrity [----------------------------------------------] 100% (1/1) loading package files [----------------------------------------------] 100% (1/1) checking for file conflicts [----------------------------------------------] 100% (1/1) checking available disk space [----------------------------------------------] 100% :: Processing package changes... (1/1) upgrading archlinux-keyring [----------------------------------------------] 100% gpg: key CDB7978664F502EC was created 12309 seconds in the future (time warp or clock problem) ==> Appending keys from archlinux.gpg... gpg: key CDB7978664F502EC was created 12308 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) gpg: key CDB7978664F502EC was created 12307 seconds in the future (time warp or clock problem) ==> Locally signing trusted keys in keyring... ==> ERROR: 99B6618472A3B3B814185BAED7D3D823B88BDB9B could not be locally signed. error: command failed to execute correctly :: Running post-transaction hooks... (1/3) Reloading system manager configuration... (2/3) Restarting marked services... (3/3) Arming ConditionNeedsUpdate... ``` به نظر میاد خطای زمان و تاریخه ولی خب زمان من که درسته با سایت time.ir که حداقل برابر برابره ![Screenshot_20260629_214332](https://forum.parchlinux.com/uploads/default/original/1X/ca1239e52d0645f71cf07f916f4635d344514974.png) ---
**Author:** ![sbehdani](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/sbehdani/32/938_2.png) [@sbehdani](https://forum.parchlinux.com/u/sbehdani)\ **Post date:** [June 29, 2026, 6:34pm UTC](https://forum.parchlinux.com/t/topic/1098/4 "2026-06-29T18:34:38Z")
داره سر زمان غر میزنه همچنان؛ ساعتتون یا تایم‌زونتون برابر نیست با چیزی که باید باشه. ```bash sudo timedatectl set-ntp true sudo timedatectl set-timezone Asia/Tehran ``` این رو امتحان کنید و اگر هم نشد با استفاده از این ویدئو کارساز ntp رو تغییر بدید. > **[آپارات - سرویس اشتراک ویدیو](https://www.aparat.com/v/qsmjk0e)** بعدش دوباره امتحان کنید: ```bash sudo pacman -S archlinux-keyring sudo pacman -Syu --noconfirm ``` ---
**Author:** ![Sajjad\_Rahbari](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/sajjad_rahbari/32/898_2.png) [@Sajjad\_Rahbari](https://forum.parchlinux.com/u/Sajjad_Rahbari)\ **Post date:** [June 29, 2026, 7:22pm UTC](https://forum.parchlinux.com/t/topic/1098/5 "2026-06-29T19:22:22Z")
مشکل اپدیت نشدن تقریبا حل شد با اینکه من از طریق تنظیمات قبلا تایم و زون رو تغییر داده بودم ولی مثل اینکه باید از طریق ترمینال هم اینکار رو انجام میدادم. فقط بعد اپدیت با اینکه اپدیت به نظر به درستی پایان یافت ولی خطایی وجود داشت ```auto :: Running post-transaction hooks... ( 1/33) Creating system user accounts... ( 2/33) Creating temporary files... ( 3/33) Updating journal message catalog... ( 4/33) Updating udev hardware database... ( 5/33) Applying kernel sysctl settings... ( 6/33) Reloading system manager configuration... ( 7/33) Reloading user manager configuration... ( 8/33) Updating the MIME type database... ( 9/33) Enqueuing marked services... (10/33) Reloading device manager configuration... (11/33) Arming ConditionNeedsUpdate... (12/33) Updating fontconfig configuration... (13/33) Rebuilding certificate stores... (14/33) Updating module dependencies... (15/33) Install DKMS modules ==> dkms install --no-depmod broadcom-wl/6.30.223.271 -k 7.0.14-arch1-1 ==> depmod 7.0.14-arch1-1 (16/33) Restart a running sshd.service (17/33) Updating linux initcpios... ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'archiso' ==> Using configuration file: '/etc/mkinitcpio.conf' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img ==> Starting build: '7.0.14-arch1-1' -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [microcode] -> Running build hook: [modconf] -> Running build hook: [block] -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont] -> Running build hook: [plymouth] -> Running build hook: [filesystems] -> Running build hook: [fsck] ==> ERROR: module not found: 'nvidia' ==> ERROR: module not found: 'nvidia_modeset' ==> ERROR: module not found: 'nvidia_uvm' ==> ERROR: module not found: 'nvidia_drm' ==> Generating module dependencies ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img' ==> WARNING: errors were encountered during the build. The image may not be complete. error: command failed to execute correctly (18/33) Updating the appstream cache... ✔ Metadata cache was updated successfully. (19/33) Restarting accounts-daemon... (20/33) Reloading system bus configuration... (21/33) Checking for old perl modules... (22/33) Updating fontconfig cache... (23/33) Updating GIO module cache... (24/33) Compiling GSettings XML schema files... (25/33) Probing GTK3 input method modules... (26/33) Updating icon theme caches... (27/33) Reloading GVFS config... (28/33) Updating the info directory file... (29/33) Updating the desktop file MIME type cache... (30/33) Updating the vlc plugin cache... (31/33) Updating X fontdir indices... (32/33) Reinstall GRUB UEFI system detected. Reinstalling GRUB for UEFI... Installing for x86_64-efi platform. Installation finished. No error reported. Generating grub configuration file ... Found linux image: /boot/vmlinuz-linux Found initrd image: /boot/intel-ucode.img /boot/amd-ucode.img /boot/initramfs-linux.img Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. Found Windows Boot Manager on /dev/nvme0n1p1@/efi/Microsoft/Boot/bootmgfw.efi Adding boot menu entry for UEFI Firmware Settings ... done (33/33) Generate GRUB configuration Generating grub configuration file ... Found linux image: /boot/vmlinuz-linux Found initrd image: /boot/intel-ucode.img /boot/amd-ucode.img /boot/initramfs-linux.img Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. Found Windows Boot Manager on /dev/nvme0n1p1@/efi/Microsoft/Boot/bootmgfw.efi Adding boot menu entry for UEFI Firmware Settings ... done ``` همان طور که معلومه این ارور برای nvidia هست من فکر کردم این به دلیل ان است که من قبلا تلاش در نصب درایور انویدیا داشتم ولی خب خطا میداد همینطور مرورگر پیشفرض هم بعد از ری استارت دیگر باز نشد و من مجبور به نصب فایر فاکس شدم… بخش اول مشکل من حل شد ولی بخش دوم همچنان باقیست من طبق راهنمای موجود در سایت رسمی arch اقدام به نصب درایور اختصاصی کارت گرافیک خودم کردم ولی اکنون بعد از نصب به نظر میرسه کارت گرافیک نصب نشده چون صفحه بزرگتر شده و نمیتوان رزولویشن را تغییر داد و همه چیز بی کیفیت شده ، من قسمت ترمینال نصب را در اختیار شما قرار میدهم : ```auto [sajjadr@sajjad-rahbari ~]$ sudo nvidia-helper [sudo] password for sajjadr: Sorry, try again. [sudo] password for sajjadr: Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP108 [GeForce GT 1030] [10de:1d01] (rev a1) Checking card: NVIDIA Corporation GP108 [GeForce GT 1030] (rev a1) Your card is supported by all driver versions. IMPORTANT: As of driver 590, Arch has switched to Open Kernel Modules. Your card is also supported by the Tesla 535 drivers series. It is recommended to install the nvidia-open package. [sajjadr@sajjad-rahbari ~]$ sudo nano /etc/mkinitcpio.conf [sajjadr@sajjad-rahbari ~]$ sudo pacman -S nvidia-open nvidia-utils nvidia-settings warning: nvidia-open-610.43.02-7 is up to date -- reinstalling warning: nvidia-utils-610.43.02-3 is up to date -- reinstalling warning: nvidia-settings-610.43.02-1 is up to date -- reinstalling resolving dependencies... looking for conflicting packages... Package (3) Old Version New Version Net Change extra/nvidia-open 610.43.02-7 610.43.02-7 0.00 MiB extra/nvidia-settings 610.43.02-1 610.43.02-1 0.00 MiB extra/nvidia-utils 610.43.02-3 610.43.02-3 0.00 MiB Total Installed Size: 894.64 MiB Net Upgrade Size: 0.00 MiB :: Proceed with installation? [Y/n] y (3/3) checking keys in keyring [------------------------------------] 100% (3/3) checking package integrity [------------------------------------] 100% (3/3) loading package files [------------------------------------] 100% (3/3) checking for file conflicts [------------------------------------] 100% (3/3) checking available disk space [------------------------------------] 100% :: Processing package changes... (1/3) reinstalling nvidia-utils [------------------------------------] 100% (2/3) reinstalling nvidia-open [------------------------------------] 100% (3/3) reinstalling nvidia-settings [------------------------------------] 100% :: Running post-transaction hooks... (1/9) Creating system user accounts... (2/9) Reloading system manager configuration... (3/9) Enqueuing marked services... (4/9) Reloading device manager configuration... (5/9) Arming ConditionNeedsUpdate... (6/9) Updating module dependencies... (7/9) Updating linux initcpios... ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'archiso' ==> Using configuration file: '/etc/mkinitcpio.conf' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img ==> Starting build: '7.0.14-arch1-1' -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [microcode] -> Running build hook: [modconf] -> Running build hook: [block] -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont] -> Running build hook: [plymouth] -> Running build hook: [filesystems] -> Running build hook: [fsck] ==> Generating module dependencies ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img' -> Early uncompressed CPIO image generation successful ==> Initcpio image generation successful (8/9) Reloading system bus configuration... (9/9) Updating the desktop file MIME type cache... [sajjadr@sajjad-rahbari ~]$ ``` به نظرم همه چیز بدون خطا اجرا شده ولی نمیدانم چرا پس کار نمیکنه ---
**Author:** ![sbehdani](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/sbehdani/32/938_2.png) [@sbehdani](https://forum.parchlinux.com/u/sbehdani)\ **Post date:** [June 29, 2026, 7:42pm UTC](https://forum.parchlinux.com/t/topic/1098/6 "2026-06-29T19:42:11Z")
درایور گرافیک رو از مستندات پارچ نصب کنید. برای گرافیک شما توصیه میشه درایور ۵۸۰ رو نصب کنید برای این کار اول از همه مخزن chaotic رو فعال کنید: ```auto sudo pacman -S chaotic-aur sudo chaotic-install ``` و بعدش درایور رو نصب کنید: ```auto sudo pacman -S nvidia-580xx-dkms ``` ---
**Author:** ![Sajjad\_Rahbari](https://forum.parchlinux.com/user_avatar/forum.parchlinux.com/sajjad_rahbari/32/898_2.png) [@Sajjad\_Rahbari](https://forum.parchlinux.com/u/Sajjad_Rahbari)\ **Post date:** [June 29, 2026, 8:32pm UTC](https://forum.parchlinux.com/t/topic/1098/7 "2026-06-29T20:32:26Z")
واقعا متشکرم از شما پشتیبانی واقعا عالی و سریع و کامل بود 🙂 ❤ فقط خدمت کسانی که در اینده احتمالا میبینن این تاپیک رو برای کارت گرافیک بعد از نصب و فعال کردن chaotic اگر براشون دستور ```auto sudo pacman -S nvidia-580xx-dkms ``` خطای ```auto error: target not found: nvidia-580xx-dkms ``` داد از دستور زیر استفاده کنند: ```auto sudo pacman -Sy nvidia-580xx-dkms ``` همچنین ممکنه براتون یه جاهایی گیر کنه و باید یه چند دقیقه یا چندین دقیقه صبر کنید تا بیاد براتون بعدش هم یه ارور تایم اوت میده که مهم نیست. بزارین کارشو ادامه بده. ---
**Author:** ![system](https://forum.parchlinux.com/uploads/default/original/1X/34170312e7dd9d94530c016525b9fe0d7bb57e97.png) [@system](https://forum.parchlinux.com/u/system)\ **Post date:** [June 29, 2026, 9:33pm UTC](https://forum.parchlinux.com/t/topic/1098/8 "2026-06-29T21:33:21Z")
This topic was automatically closed 60 minutes after the last reply. New replies are no longer allowed.